Semi Truck Tire Repair in Laredo, TX
If you have a flat, a blowout or a tire losing air on a semi or trailer in Laredo, call the number on this page. You'll be connected with a local provider who handles roadside truck tire service and tire repair.
Get off the road and set your triangles first. Hazard flashers on as soon as you stop, triangles out within 10 minutes, and stay clear of traffic while you wait. Leave changing and inflating the tire to the provider. Federal workplace safety rules (OSHA 1910.177) call for trained workers and a restraining cage or barrier when inflating truck tires, because a wheel can separate under pressure.
When a tire can't stay on the truck
Federal rule 49 CFR 393.75 says a truck can't be driven on a tire that:
- is flat or has a leak you can hear;
- shows ply or belt material through the tread or sidewall;
- has tread or sidewall separation;
- has a cut deep enough to expose the ply or belts.
Minimum tread depth is 4/32 of an inch on steer tires and 2/32 of an inch on all other tires, measured in a major groove. Texas commercial vehicle inspections use the same limits.
A regrooved tire with a load rating of 4,920 pounds or more isn't allowed on the front axle of a truck or tractor.
What a tire call usually covers
- Changing a flat or damaged tire on the tractor or trailer.
- Checking the wheel, the lug nuts and, on duals, the other tire of the pair.
- Finding slow leaks: valve stems, punctures, bead leaks.
- Replacing a tire that doesn't meet the tread or damage rules above.
What to tell the provider
- Where the truck is, and which side of the road.
- Which tire: steer, drive or trailer; left or right; inside or outside dual.
- Tire size, printed on the sidewall (for example, 295/75R22.5 or 11R22.5).
- Whether the wheel or anything around it is damaged.
- Whether you want a new tire, a used one or a repair, if you know.
Before you hire
- Ask about the service call charge and the price of the tire before they come out.
- Ask whether they carry your tire size.
- Get a receipt that lists the tire position and size for your records.
Truck tire FAQ
What's the legal tread depth on a semi?
4/32 of an inch on steer tires and 2/32 of an inch on all other tires, under 49 CFR 393.75.
Can I drive to a tire shop on a flat?
Federal rules don't allow driving on a flat tire. A flat steer tire is especially risky. Call for roadside service instead.
What should I do if a tire blows out while I'm driving?
Hold the wheel firmly, stay off the brake while the truck slows, then brake gently and pull off. Our tire blowout guide explains each step.
Flat on the road?
Get to a safe spot, set your triangles and call. Have the tire size and position ready.
Related: Semi truck tire blowout: what to do · Roadside truck repair · Trailer repair · Semi truck repair in Laredo
Sources
- 49 CFR 393.75, tires
- 49 CFR 392.22, warning devices
- Texas DPS, Commercial Vehicle Inspections (VI-82, PDF)
- OSHA 1910.177, servicing rim wheels
Last updated: November 21, 2026