Webb County Semi Truck HelpEspañolCall (956) 462-6935

Roadside Truck Repair in Laredo, TX

If your truck broke down on the road in Laredo, call the number on this page. You'll be connected with a local road service provider who can tell you whether the problem can be handled where the truck sits or needs a shop.

First, make the scene safe. Turn on your hazard flashers as soon as you stop. Set your warning triangles as soon as you can. Federal rules say within 10 minutes (see below). Stand away from the travel lanes while you make calls, not between the truck and traffic.

Call (956) 462-6935

What a road service call can usually handle

What a provider can fix on the shoulder depends on their truck, their tools and the parts on hand. Common roadside jobs include:

  • No-starts: dead batteries, loose or corroded cables, starter problems.
  • Air system problems: a broken air line, a leaking glad hand seal or fitting.
  • Tires: changing a flat or a damaged tire (see tire repair).
  • Lights and wiring: a trailer light circuit out, a damaged pigtail.
  • Aftertreatment messages: checking why a regen won't run or why the truck derated (see diesel engine repair).
  • Coolant and belts: a split hose or a thrown belt.

Bigger jobs, like internal engine work, a transmission, or a full brake job, usually mean getting the truck to a shop. This site does not offer towing. In Texas, every tow truck that tows on public roads needs a permit from the Texas Department of Licensing and Regulation (TDLR). If you need a tow, ask whoever you call for their TDLR permit.

What to tell the mechanic

  1. Exact location: highway, direction of travel, nearest exit or mile marker, or the yard or truck stop name.
  2. Your truck and trailer: year, make, model; dry van, reefer, flatbed or tanker.
  3. What it's doing: won't start, lost power, warning lights or messages, air leak, smoke, noise.
  4. Whether it's safe where it is: fully on the shoulder, partly in a lane, on a ramp, near a curve.
  5. Load details: loaded or empty, hazmat placards, reefer temperature.

Warning triangles: where they go

Where to place warning triangles for a stopped truck Two road diagrams, not to scale. Top: on a divided highway or one-way road, all three triangles go behind the truck toward approaching traffic, at about 10 feet, 100 feet and 200 feet. Bottom: on a two-way road, one triangle about 10 feet from the truck on the traffic side toward oncoming traffic, one about 100 feet behind and one about 100 feet ahead. Turn on flashers right away and set triangles within 10 minutes. Divided highway or one-way road (like I-35) shoulder traffic →traffic → 10 ft100 ft200 ft Two-lane or undivided road ← oncomingtraffic → 10 ft100 ft100 ft Flashers on right away. Triangles out within 10 minutes.Distances from 49 CFR 392.22. Not to scale.
Hazard flashers on right away, triangles out within 10 minutes (49 CFR 392.22).

The rule is in 49 CFR 392.22. When a commercial vehicle stops on the road or the shoulder (other than for normal traffic stops):

  • Turn on the hazard flashers right away. Leave them on until the triangles are out.
  • Set out the warning devices as soon as possible, and no later than 10 minutes after stopping.

On a two-way or undivided road, use three triangles:

  • one about 10 feet behind the truck, on the traffic side (toward traffic coming up behind you);
  • one about 100 feet behind the truck, centered in the lane or shoulder you're in;
  • one about 100 feet ahead of the truck.

On a divided highway or a one-way road (like I-35), all three go toward approaching traffic:

  • one about 10 feet from the rear of the truck, on the traffic side;
  • one about 100 feet back;
  • one about 200 feet back.

Near a hill, curve or anything that blocks the view (within 500 feet), move the triangle on that side so it sits 100 to 500 feet from the truck. That way drivers coming around the curve get warning in time. Inside a city's business or residential area, triangles aren't required unless it's dark and the street lighting is too weak to see the truck from 500 feet.

Should you move the truck?

Don't drive it if:

  • the low-air warning is on and pressure won't build back up;
  • a steer tire is flat or damaged;
  • the engine is overheating or has a red STOP light;
  • you see fuel, oil or coolant pouring out.

If the truck is in a dangerous spot and it can still move safely at low speed to a wider shoulder or the next exit, that may be safer. When in doubt, ask the provider on the phone before moving it.

Before you agree to the job

  • Ask how the call is billed: a service call charge, an hourly rate, mileage, and when the clock starts.
  • Ask for the price in writing (text or email is fine) before work begins.
  • Ask what they can do on site and what would need a shop.
  • Get an itemized receipt for your maintenance records.

Roadside repair FAQ

Can a mobile mechanic fix a semi on the side of the road?

Often, yes, for tires, batteries, air lines, lights, belts and hoses. Engine, transmission and major brake work usually needs a shop. It depends on the provider's truck and the parts they carry.

Is road service available at night in Laredo?

Hours depend on the provider you reach. Call and ask. If no one answers, leave your location, your number and what happened, and you'll get a call back.

Do I need a tow or a road service truck?

If the truck can't move safely, or the repair needs a lift, you'll likely need a tow. Many breakdowns don't. Tell the provider what happened and they'll tell you which one fits. Any tow truck working on Texas roads needs a TDLR permit.

How long does a roadside repair take?

It depends on the problem, the parts and the distance. A tire or an air line is a short job when the right part is on the truck. An unknown no-start can take longer. The provider can give you a better idea once they know the details.

Broke down right now?

Get the triangles out, stay clear of traffic and call. Have your location and truck details ready.

Call (956) 462-6935

Related: Semi truck tire blowout: what to do · Semi truck repair costs · All services

Sources

Last updated: November 21, 2026

Call (956) 462-6935
MenuClose