The DOT Annual Inspection: What's Checked and How to Get Ready
Short answer: every commercial truck, and every trailer and converter dolly in a combination, needs to pass a periodic inspection at least once every 12 months under federal rule 49 CFR 396.17. The inspection covers a set list of systems, from brakes and tires to lights and the coupling. It has to be done by a qualified inspector, and proof has to ride on the vehicle. In Texas, commercial vehicles also still need the state safety inspection.
This site does not perform inspections. If your inspection turned up problems, or you want the truck checked before it, call the number on this page to reach a local repair provider.
Who needs it
Under 49 CFR 396.17, every commercial motor vehicle has to be inspected, and the rule counts each vehicle in a combination separately. A tractor, a semitrailer and a full trailer each need their own inspection, and so does a converter dolly.
The inspection has to cover, at minimum, the items in Appendix A to Part 396, and each of those items must have passed inspection at least once in the previous 12 months.
What gets checked
Appendix A lists these areas:
- Brake system
- Coupling devices
- Exhaust system
- Fuel system
- Lighting devices
- Safe loading
- Steering mechanism
- Suspension
- Frame
- Tires
- Wheels and rims
- Windshield glazing
- Windshield wipers
- Motorcoach seats (buses only)
- Rear impact guard
Brakes and tires are the two areas drivers can keep an eye on between inspections. For tires, the federal minimum tread depth is 4/32 of an inch on steer tires and 2/32 on the rest (49 CFR 393.75). For brakes, a brake past its readjustment limit is a rejection item in Texas commercial inspections.
Who can do the inspection
The carrier can do it in-house, or use a commercial garage, fleet leasing company, truck stop or similar business as its agent. Either way, the person doing it has to be qualified under 49 CFR 396.19:
- understand the inspection criteria in Part 393 and Appendix A and be able to spot defective parts;
- know the methods, tools and equipment used for the inspection; and
- have either a certificate from a federal or state-sponsored training program, or at least one year of training or experience as a mechanic or inspector (at a carrier, a commercial garage, a fleet leasing company or a government inspection program).
The carrier has to keep proof of each inspector's qualifications for as long as that person does its inspections, plus one year. Brake work has its own qualification rule (49 CFR 396.25). When you choose a shop, ask how its inspector qualifies.
Proof of inspection
The truck can't be used unless proof of the inspection is on it. That can be the inspection report, or a sticker or decal based on it that shows:
- the date of the inspection;
- the name and address of the carrier or other entity where the report is kept;
- the vehicle's identification, if it isn't clearly marked; and
- a statement that the vehicle passed an inspection under 49 CFR 396.17.
Texas inspections
Texas changed its inspection program on January 1, 2025, but the change was for non-commercial vehicles, which no longer need a safety inspection to register. Texas DPS says all commercial vehicles, in all counties, must still pass a vehicle safety inspection. The state commercial inspection is done by an inspector certified by DPS as a commercial inspector.
Federal rules also say that passing a state periodic inspection that meets the Appendix A minimums counts toward the annual requirement, for 12 months from the end of the month it was done. Ask your inspection station or your compliance person how that applies to your trucks.
How to get a truck ready
A week or two before the due date:
- Walk around with the pre-trip checklist and write down anything that's not right: lights, mud flaps, air leaks, tire damage, cracked glass, wipers.
- Check tread depth with a gauge on every tire, steer tires first.
- Look at brake adjustment indicators where you have them, and listen for leaks with the system charged.
- Check the coupling: fifth wheel, kingpin, locking jaws, and the trailer's landing gear.
- Fix what you found before the inspection, so you don't pay for a second trip.
A repair provider can handle the fixes. The inspection itself goes to a qualified inspector or a DPS-certified station.
Annual inspection FAQ
How often is a DOT annual inspection required?
At least once every 12 months for each truck, trailer and converter dolly, under 49 CFR 396.17.
Is there a grace period?
Section 396.17 doesn't mention one. It says each item must have passed inspection at least once during the preceding 12 months. If you're close to the date, plan the inspection early and check with your compliance person or the FMCSA.
Does a Texas state inspection count as the annual inspection?
A state periodic inspection that meets the federal Appendix A minimums is treated as meeting the annual requirement for 12 months from the end of the month it was done. Confirm with the inspection station how your inspection was documented.
Can any mechanic do the annual inspection?
Only someone who meets 49 CFR 396.19, and for the Texas state inspection, a DPS-certified commercial inspector.
Inspection turned up problems?
Call with the list of items the inspector wrote up.
Related: Truck brake repair · Trailer repair · Semi truck tire repair · All guides · Semi truck repair in Laredo
Sources
- 49 CFR 396.17, periodic inspection
- 49 CFR 396.19, inspector qualifications
- 49 CFR Appendix A to Part 396
- 49 CFR 396.25, brake inspector qualifications
- 49 CFR 393.75, tires
- Texas DPS, vehicle safety inspection changes
- Texas DPS, Commercial Vehicle Inspections (VI-82, PDF)
Last updated: November 21, 2026